DTF Transfers Pressing & Caring Instructions
Pressing Instructions
Please note our transfers are meant to be pressed with a heat press. We highly recommend using a heat press for best results and durability.
Garment should be pre-pressed for 5 seconds to remove moisture and flatten the fibers.
- Temperature: Set your temperature to 300°F
- Pressure: Set your pressure to Firm (Heavy pressure)
- Place your transfer onto the garment, image side up and white side down.
- Time: Press your garment for 10 seconds and open the press.
- Peel Hot: Peel the backing film in a continuous motion as soon as you open the press.
Repress the transferred design for 5 seconds with a teflon/parchment paper on top to increase durability.
If you'd like to try pressing our transfers with a Cricut or a clothing iron, you can follow these suggested instructions.
Please note that we are not responsible for transfers that are pressed incorrectly or with the wrong equipment. Our transfers are meant to be pressed with a heat press.
Since every heat press is different, we highly recommend doing a test trial first to make sure pressing instructions work with your heat press or if any adjustments to temperature / pressure are required.
Care Instructions
Turn the garment inside out. Machine wash cold. Do not bleach. Do not use softener. Do not dry clean or iron directly over the transfer. Tumble dry low.
We recommend waiting 24 hours before washing.